How to Unstick a Suzuki Ignis Key

Suzuki's funky, cheap little city car is getting a midlife refresh. It's no hot-hatch however it does eat up the tarmac in rural and urban areas quickly, and its handy turning circle makes town centre driving effortless.

The new model also packs innovative safety and driver assistance technology such as lane departure warning and a drowsiness alarm that is a welcome addition to long drives.

Steering Lock

The steering lock is a security feature which prevents your Ignis being stolen while in gear. It's an important security measure, but it can be frustrating when you have to go someplace and you're not able to unlock the wheel. There are fortunately, a few simple things you can do to fix the problem.

In the beginning, determine if the ignition switch is in the "on" position. If this is the case, try turning the key in the same direction you did before the wheel was locked. It can be a bit difficult, but in most cases it is enough to unlock the wheels.

If the wheel is still unable to unlock, you could spray a small amount of canned air into the ignition cylinder to help lubricate it. Wear eye protection to avoid getting sprays of air that have been sprayed onto your face. Liquid graphite can also be used to lubricate the cylinder.

If none of these strategies work, you'll need to replace the ignition lock assembly. This component is easy to find in any auto parts shop. Just make sure you purchase an identical replacement key for suzuki swift and compare it to your original before you attempt to install it. Also, make sure to remove the cover covering the ignition so you can be able to see and access the ignition.

Worn

The steering lock could cause the ignition switch to become stuck. This is a safety feature designed to prevent your Ignis from rolling away while the engine is running. If this happens, manipulating the steering wheel will unbind it.

As time passes, the Ignis keys can wear out and become more difficult to turn. This might not be as common as a bad ignition switch, but it does occur. If this is the case, then you need to replace your key.

Check to see if anything is blocking your Ignis ignition key from entering the cylinder. Sometimes there can be debris or dirt that can be tucked away inside, preventing the key from turning exactly the way it is supposed to.

Finally, you should try using a bit of lubrication to see if that can help. You can purchase a variety of lubricants at your garage or at your local auto parts store.

A silicon "glow-in-the-dark" key cover is a different option. These covers absorb light energy and release it in murky or dark conditions. They will also help to protect your fob or key from wear and wear and tear. They are available for a wide range of Suzuki models and can be bought through the internet or at the Suzuki dealership near you.

Bent

Keys can be bent over time. This could cause the teeth on the key to not be able to engage with the lock cylinder in the same way and near prevent the key from turning in the ignition. In this scenario it is necessary to replace the key. It is a good plan to duplicate your spare key and keep it in a safe place.

Another possible cause is the ignition cylinder itself may wear out. The lock pins within the cylinder may become stuck together, which can prevent the key from being able to go completely into or out of the ignition cylinder. The replacement suzuki swift key of the cylinder may solve this issue, however it is best to do so before your key gets stuck in the ignition, to avoid further damage.

If your Ignis key still stuck after trying the simple fixes It could be the right time to consider lubricating the cylinder. Graphite or liquid graphite could allow the lock pins move more freely, which will unlock your key. You can purchase this at most auto parts stores. Make sure that you place your Ignis in park prior to applying the lubricant. Do not attempt to manipulate the Ignis in order to unbind it. This could result in more serious issues.

Broken

If you've tried everything to unstick a key and it's still not moving, your last resort is to try a lubricant. You can purchase this lubricant from a local auto parts store and apply it with either a cotton swab, or cotton swab to the inside the lock cylinder. Move the key back and forth gently to spread the lubricant around and then try again. Try to massage it forward, but be careful not to push too hard because you could cause damage to the cylinder.

The internal circuitry of the key can also be unresponsive due to aging and usage. This isn't as common and usually means you'll need to have the key duplicated for an entirely new one.

In the end, the case of the case of your Suzuki key fob might be damaged or worn out. This is especially common especially if you're using an imitation key fob with a rubber or plastic shell. Depending on the situation, The Key Crew can sometimes migrate the internal circuitry of your old key fob into an alternative shell case, saving you from having to purchase a completely new key fob. We'll let you know the possibility for your particular situation when we call you to schedule the service.