Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and comfortable method of heating your home without harmful gases or soot. They are easy to install as an electrical fire.

The BARDA contract supports the development of the BioFire emerging CoV panel, a nucleic acid amplifying test that can be used in conjunction with BioFire filmArray Systems for the detection of known and emerging human acoronaviruses using nasopharyngeal or swabs as well as saliva samples.

Eco-friendly

Bioethanol is a green alternative to wood or gas. The fuel is made from plant by-products and utilizes a natural process to convert sugars into alcohol. It is a better option over other fireplaces as it produces no harmful emissions and also has a lower carbon footprint. Bioethanol is also a safer alternative to other fires as it does not produce smoke or soot. It also does not require a flue, so it can be placed anywhere in your garden or home.

A multi-drug resistant (MDR) bacteria is among the most serious health risks of the present. New testing methods can detect MDR bacteria early and prevent further complications. BioFire FilmArray is one of these tests. This test employs the symptom driven approach to identify pathogens that could cause sepsis. Its results are available within a matter of hours, so providers can begin treatment right away.

The process of Molecular PCR that amplifies DNA or RNA molecules into millions or billions of copies. This permits the analysis of small amounts of body fluid or tissue to determine if certain genetic sequences are present. It is a useful tool for laboratory professionals, and can assist them in diagnosing serious diseases in a quick and cost-effective way. The BioFire film array PCR system is an ingenuous instrument for diagnosing infectious diseases. It can be utilized in many environments such as hospitals and laboratories.

For tests for respiratory problems, you can wipe a swab over your nose before sending it to the lab. BioFire's system allows doctors to take action quickly and with a short turnaround time. This means that patients will experience better outcomes and will not have to wait for results.

The Chanouf Farm Biofire company has created an agroforestry recycling unit which makes use of olive and pear waste to make biomass power and organic charcoal. The products are sold to the public to replace traditional wood charcoal and coal briquettes with eco-friendly alternatives. In addition they can be used to fuel the Kachelofen fireplace that provides radiant heat that is greener than gas and electric fires.

Clean burning

When you utilize bio-fire, you're not only saving energy, but you're also helping the environment by using a sustainable fuel source. The combustion of bioethanol doesn't produce harmful gases like carbon dioxide. It releases only water vapour and heat. This makes it a cleaner and safer option for Indoor ethanol fireplaces use.

Ethanol is a byproduct of the fermentation of plant sugars and is classed as an alternative source of energy that can be used to generate renewable fuel. This means that it can be made quickly and won't be depleted like fossil fuels like coal and oil. Bioethanol can reduce dependence on foreign imports and increases the chance of shortages.

Bio-fires can be set up easily and in existing fireplace openings, or as an independent unit. They are a good alternative to gas and wood fires. They also make an excellent choice for offices and homes that do not have a chimney or flue.

When a bio fuel fireplaces-fire is ignited the burner is outfitted with a specific media that absorbs the liquid ethanol fuel and makes it ready to be burned. The ethanol fireplace insert fuel is burned in the flames, and the vapours are released into the air through the vent. The flames appear more natural and creates a mesmerising beauty that can't be replicated with wood or gas fires.

Bio-fires benefit from not needing a vent or flue to replenish oxygen during combustion. They also don't release carbon monoxide, which is required to be vented into the room in gas fires with open fronts.

The BioFire Respiratory panel makes use of multiplex PCR to simultaneously test for respiratory pathogens. It takes approximately an hour. This enables doctors to identify and eliminate respiratory diseases much faster than they can with conventional lab tests that require patient visits. This saves time and money for both patients and the health healthcare system.

Safe indoors

Bio-fires are far safer to use indoors compared to real fires because they release no smoke, ash or carcinogenic fumes. Bio-fires don't create carbon monoxide that can be dangerous if breathed in. The bio flame fireplace-ethanol fuel used in them is flammable however it is important to be careful when handling the burner and refuelling your fire. It should be topped up only after the burner has been shut off and the fire is cool. Any spills should be cleaned immediately.

The company's diagnostic FilmArray systems - BioFire 2.0 and BioFire Torch--are simple to use, and can run eight different commercially available US Food and Drug Administration cleared diagnostic panels, three additional panels that have been approved for use in emergencies, and six environmental test panels. These tests include a respiratory test panel designed to quickly detect and differentiate respiratory diseases such as COVID-19, emerging coronaviruses, and COVID-19.

The COVID-19 panel has been awarded a grant from the Biomedical Advanced Research and Development Initiative (BARDI) which is part of the US Department of Defense's Strategic Access Program. The COVID-19 test is an antigen-based system, allowing clinicians to distinguish between the symptoms caused by COVID-19 and other respiratory illnesses with nearly the same accuracy as the rapid antigen tests currently being used.

The company is also working on a test for SARS-CoV-2 for its Respiratory Panel 2.1. The multiplexed nucleic acid amplification assay will be available for use with the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 and 21 other respiratory pathogens in nasopharyngeal and saliva samples within less than an hour. The assay is being developed on an rapid timeline, and submission to the FDA for EUA and 510(k) clearance is expected in Q3 of 2020.

While bio-ethanol flame-effect fires are extremely safe to use, they should be kept away from flammable materials like blankets, curtains and cushions. They should not be set near anything that may catch fire and it is recommended to keep flammable items at least 10 feet away from them. The bioethanol fuel should be stored in an area that is dry and secure so that children or pets cannot easily reach it.

Simple to use

The bioethanol fireplace does not have a chimney to worry about. All you require is a secure location to put it in and some fuel. After you've filled the burner with fuel, light it up. This will give the appearance of a real flame. When the flame is lit, it will heat the room without releasing much smoke. It will also produce a lot of heat, similar to what a wood-burning fire would. bio ethanol fuel fireplace fires are easy to maintain and don't need any servicing or maintenance, other than the occasional wipe down.

The BioFire RP2.1 Test, EZ, unlike most rapid tests that use a syndromic method to identify typical signs of infection and symptoms, can provide results within 45 minutes. This test is suitable for patients suffering from upper respiratory symptoms and has a sensitivity rate of 98%. The test can detect up to 19 viruses and three bacteria in one test which makes it a good option for the treatment of patients.

The BioFire system combines multiplex PCR testing, sample preparation, and report on results into an integrated platform. This helps laboratories streamline their workflow, and eliminates the need for a sequential approach that requires a separate and send-out test. This can result in better patient outcomes as the appropriate test is chosen the first time and the need for expensive tests based on culture is eliminated. Additionally the BioFire system can identify pathogens and their associated resistance genes to antimicrobials at a molecular level, providing information that is more accurate than conventional methods.

Molecular diagnostics are increasingly used to improve the care of patients and outcomes. The BioFire panel RP2.1+ utilizes a syndromic method to simultaneously target 23 pathogens often implicated in respiratory illnesses. The test can be performed on the BioFire FilmArray 2.0 and Torch systems, and produces results in around 45 minutes.

The test is available in the US under FDA Emergency Use Authorization. It will be available commercially following the initial DoD demands are met. The BioFire Defense team has also created a fully automated sample-to-result assay for the rapid detection of COVID-19. The test is in the process of development and will be made available once the initial DoD demand is satisfied.